15.03.2023 |
HAFNER's first valve terminal series for EtherCAT and PROFINET fieldbus protocols and D-Sub connection. On request with CANopen and EtherNet/IP.
Key facts:
The panel mounting valves and actuation elements of the BAS-series have been designed for challenging environments.
They offer a high IP66 protection, can be used in exlosion hazardous environments zone 1,2,21 and 22 and in a wide temperature range from -40 to +65°C.
Download PDF datasheets
Thanks to the low power consumption of 0.7W, this new solenoid system can be used with a wide range of safety barriers.
Solenoid and valve body can be easily combined via the Microsol interface. Valves are available with port size G 1/8" to G 1/2" (22 mm MH series) and with G 1/8" ports for the 16 mm MD series
Download PDF datasheets
The CBE control blocks have been designed for single-acting actuators (spring-close) to control butterfly valves with inflatable valve-seat.
The block also offers a fail-close function. If the electricity and/or air signal cuts-off the actuator will close by the force of the springs. However, in case the air is away and the valve-seat won’t be pressurised.
Download PDF datasheet
Some valves are no longer included in the catalogue such as:
However, the products will continue to be available for relevant needs and a certain time for spare parts requirements.
If you need further details about the discontinued products, please do not hesitate to contact us.