General technical information

 

The following technical specifications are valid for all HAFNER valves.
 

Temperature range:
 

Series

Temperature range

   

BV, BR, BL, BA           

- 20°C … + 50°C

BD, BH

- 10°C … + 60°C

HV, HVR, P

- 10°C … + 60°C

MH / MNH DC-version

- 10°C … + 60°C

MH / MNH AC-version

- 10°C … + 50°C

MD / MK

- 10°C … + 50°C

TT

- 50°C … + 50°C


Several customer-specific items have been catered for an enlarged temperature range.


Leckage rate at 6 bar pressure:

All (100 % of) the HAFNER valves leaving the factory are individually tested on function and leakage.
The following leakage rate is allowed and a valve is still rated as good with the following:

  • Internal leakage: 4 cm³ / min
  • External leakage: 2 cm² / min
 

For TT-valves only:
At temperatures below - 40°C the internal leakage can increase to 10 cm³ / min.


Standard materials used for HAFNER valves:

 

Valve Part

Series

Material
     

Bodies

Standard

anodised aluminum

 

VES / KES

stainless steel 1.4404

 

 

 

Spool

 

stainless steel 1.4404

 

 

 

Sealing-system

Standard

brass & NBR

 

TT

brass & PUR

 

VES / KES ¼“

stainless steel & PUR

 

VES / KES ½“

stainless steel & FKM

 

 

 

Other inner parts

Standard

brass, POM, NBR

 

TT

brass, POM, NBR

 

VES / KES

stainless steel, POM, FKM

     

Actuation elements

BA

PA 6.6 30 % glass filled

 

HV

Epoxy

 

BH 401

PA 6.6

 

BH 701

Duroplast

 

BHP

ABS

 

 

 

Upper part solenoids

Series 500 und 700

PA 6.6 30 % glass filled, brass

 

Other series

anodised aluminum, brass

 

VES

1.4404, operator tube 1.4305

 

KES

PA 6.6 30 % glass filled, operator tube 1.4305


PA = Polyamide

1.4404 = high graded stainless steel
POM = Polyoxymethlene
FKM = Fluoroelastomer



General Warranty:

The general warranty is 12 month from delivery. Warranty expires when valves have been opened.


Recommended signal length:

The recommended signal length to reach full flow is 50 msek.


Operation and required air-quality:

The valves are designed for being used with cleaned and lubricated or cleaned and unlubricated compressed air.
Required Air-quality-level in accordance to ISO 8573-1:2010: 7 – 4 – 4 for particles – water – oil


Lubrication:

Valves do not require any lubrication but lubrication in general increases the life-time of the products. Please avoid to lubricate the valves during a certain period of time and let them run dry later.

For low-temperatureitems:
Do not lubricate as most kinds of oil and grease do not properly operate below - 25°C.



Voltage tolerance:

The general voltage tolerance of all solenoid systems is +/- 10%.


Other:

In accordance to CETOP position paper „PP07 Machine Directive 2006/42/EC”: Single valves placed on the market are not … within the meaning of Annex V, point 4 of Machine Directive 2006/42/EC.

The HAFNER company policy is one of a continuous improvement process. We therefore reserve the right to amend, enhance and change specifications of the products presented in this document without notice.

Hafner uses Cookies. If you would like to continue using our site, we assume that you accept the use of cookies. Further information can be found in our Privacy Policy. OK