Basket: 0 item
News » Control Cabinets with PROFIBUS module

Control Cabinets with PROFIBUS module

18.04.2019
Control Cabinets with PROFIBUS module

When building control cabinets, using valve terminals with a separated profibus module offers several advantages, such as reduction of size, flexibility on the protocol type and cost efficiency.

In comparison to our standard control cabinets the ones with PROFIBUS module include additional cable glands for connecting feedback signals. Other protocols are available on request.

 

 

 

 

 

 

 

The standard control cabinet comes with 8 x 5/2-way single solenoid valves with 7 mm orifice size (1,250 Nl/min). The cabinet is made from 1.4301 (ASI 304) stainless steel with a size of 400x280x155 mm and offers protection class IP 66.

 

PROFIBUS Valve Terminal

 

 

 

The manifold plate offers an individual valve isolation on any position as a special feature. Valves can be easily exchanged by closing the screw without interruption of the air supply of the other valves on the manifold.


Hafner D1 shut-off screw

 

 

Additional elements and features can be added to the cabinet as well, such as pressure regulators or a by-pass function as illustrated below.

 

Hafner Profibus with pressure regulator and bypass

 

 

 

 If you are interested in our BUS-cabinets, please do not hesitate to contact us.


« Back
Hafner uses Cookies. If you would like to continue using our site, we assume that you accept the use of cookies. Further information can be found in our Privacy Policy. OK