Pneumatic Impactor

13.06.2019
Pneumatic Impactor

The KFZ-080 pneumatic impactor is converting pneumatic energy from compressed air into mechanical energy. It generates impulses comparable to a hitting hammer for knocking stubborn residues from walls, pipes and containers.

Using the impactor also simplifies the process of emptying tanks, silos or other reservoirs.





The maximum switching frequency of 540 strokes per minute enables a rapid loosening of materials from the reservoir wall. The frequency can be adjusted by an integrated flow regulator valve.
The impactor is operated by an oscillating valve which is fixed on the outside. It automatically starts its operation once pressure is applied.




Pneumatic impactor



Key features:

  • Operating pressure
4... 10 bar
  • Diameter
Ø 80 mm
  • Medium
Compressed air
  • Temperature range
-25°C ... +80°C
  • Mounting position
any
  • Port size
G 1/4"
  • Impact force
10 Nm
  • Switching frequency
120-540 strokes / min (flow regulator valve for adjustment included)
  • Pre-set frequency
180-300 strokes/min





Optional Accessory:

The A KFZ-080 SET adapter plate makes the Hafner impactor compatible with the old LOK 70 impactor which has been widely used in the industry. 

The adapter plate is supplied with 8 screws.


KFZ Adapter Plate


For downloading our datasheet, please click here.

If you are interested in our pneumatic impactor, please do not hesitate to contact us.



« Back
Hafner uses Cookies. If you would like to continue using our site, we assume that you accept the use of cookies. Further information can be found in our Privacy Policy. OK